Solar Charge Controller 10A New PWM HC series
2,200 ৳ 2,500 ৳ (-12%)
Solar Charge Controller 10A New PWM HC series
SR-HC series is a PWM charge controller with LCD display and two USB ports.Large-screen LCD for display, charge and discharge parameters adjustable, Allow selection of multiple battery types, with a flexibility to set the load to work during the day or night.It is widely applied to off-grid system which needs high reliability and quality products.
Main Feature Of Solar Charge Controller 10A
1. 32-bit high-speed master control chip.
2. Large-screen LCD for display, charge and discharge parameters adjustable, Allow selection of multiple battery types, with a flexibility to set the load to work during the day or night..
3. Complete multi-stage PWM charge management.
4. Built-in reverse connection protection, open-circuit protection, high temperature protection, over-current/short-circuit protection (optional), which are all self -recovery type, with no damage to the controller.
5. Double MOS anti-backflow circuit, ultra-low heat generation.
6. Lithium battery activation available.
7. Dual USB output, maximum current up to 2A, supporting high current charging of Iphone, Ipad and Android mobile phones and other devices.
Specifications Of Solar Charge Controller 10A
Specifications | ||||
HC2410 | HC2420 | HC2430 | ||
System voltage | 12V/24V | |||
Battery operating voltage range | 8-32V | |||
Rated current | Charge | 10A | 20A | 30A |
Load | 10A | 20A | 30A | |
Maximum PV input voltage | 50V, enable protection and stop charging. Below 45V, charge resumes. | |||
Charging mode | The default is PWM charging,b04/b07 can be set to intermittent charging. | |||
USB output | 5V/2A | |||
Static power consumption | ≤10mA | |||
Operating temperature | -35~+60℃ | |||
Altitude | ≤3000m | |||
IP rating | IP32 | |||
Product size | 120*75*34mm | 134*85*36mm | 159*100*39mm | |
Installation size | 108.5*57.5mm | 121*70mm | 147*80mm | |
Weight | 130g | 180g | 290g |
Reviews
There are no reviews yet.